Qualipieces RollerSki Auto-Retractable Wheels – Ski-Doo & Lynx Snowmobiles

The Qualipieces RollerSki Auto-Retractable Wheels, B-2000 to B-2011 and B-2500, are a genuine Qualipieces wheel system for Ski-Doo Pilot and Lynx Blade XC skis. They are one of the best snowmobile wheel kits because they attach to the ski axle, so the snowmobile's weight sits on the wheels instead of loading and deforming the skis, runners and carbides.

Ride safely when the trail meets little or no snow. The RollerSki self-retracting wheel system is designed for the off-trail travel that is an inevitable part of snowmobiling. Ride safely on the road or shoulder, at the hotel or gas station and on any other snowless surface while protecting your carbides and skis. The RollerSki is also an indispensable tool for moving your snowmobile on and off the trailer and for protecting the floor of your garage or the pavement in your driveway.

Features:

• Simple installation without specialized tools
• Resists frost
• No welding
• Attached via the axle
• High quality multi-purpose product
• Equipped with components that are corrosion resistant
• Retracts automatically on contact with snow

Fitment:

Each RollerSki is designed for one specific ski model. Choose the part number that matches the skis on your snowmobile:

• Ski-Doo Pilot 5.7: B-2000
• Ski-Doo Pilot 5.7 SL: B-2002
• Ski-Doo Pilot 6.9: B-2004
• Ski-Doo Pilot DS / DS2: B-2005
• Ski-Doo Pilot TS: B-2006
• Ski-Doo Pilot X: B-2008
• Ski-Doo Pilot TX: B-2009
• Ski-Doo Pilot 7.4: B-2010
• Ski-Doo Pilot RX: B-2011
• Lynx Blade XC: B-2500

Qualipieces does not recommend installing a RollerSki on a ski model it is not designed for, or on a snowmobile used off-trail (mountains, woodlands or ungroomed fields).

Specifications:

• Brand: Qualipieces
• Manufacturer: Qualipieces
• Product Line: RollerSki
• Part Numbers: B-2000 (Pilot 5.7), B-2002 (Pilot 5.7 SL), B-2004 (Pilot 6.9), B-2005 (Pilot DS / DS2), B-2006 (Pilot TS), B-2008 (Pilot X), B-2009 (Pilot TX), B-2010 (Pilot 7.4), B-2011 (Pilot RX), B-2500 (Lynx Blade XC)
• Product Type: Auto-retractable snowmobile wheel system
• Includes: 1 left RollerSki, 1 right RollerSki, mounting hardware and shims
• Mounting: Ski axle, on the inside of each ski
• Safe Speed With Wheels Engaged: Below 20 km/h (12 mph)
• Installation Time: About 30 minutes per side
• Installation Supplies: Drill with 1/4" bit, red Loctite 263, low-temperature synthetic grease, rigid plastic mallet
• Replacement Wheels: K02-9201 (5", all except B-2010 and B-2011), K02-9203 (6", B-2010 and B-2011)
• Warranty: 1-year limited warranty
• Designed and Assembled In: Quebec, Canada

Easy to Deploy and Auto-Retracting

Deploying the wheels is a simple task. With your foot, bring the wheel down to the ground, then push backwards (towards the rear of the vehicle) to engage the wheel in place. Use your hand on the ski loop for balance and to slightly lift the ski as you push backwards on the wheel. Within seconds, both wheels can be deployed and you can continue your ride on the snowless surface. Upon contact with snow, they retract automatically.

No Pressure on the Snowmobile's Skis

Unlike other snowmobile wheels on the market, the RollerSki is attached to the axle. The weight of the snowmobile, centred on the RollerSki when the wheels are engaged, avoids an overload and possible deformation of the skis, the runners and the carbides. You can install your RollerSki without worrying about damaging other parts on your snowmobile.

High Quality Materials for Superior Durability

Machined parts, superior materials and a protected spring give you years of use, winter after winter, in even the worst conditions. Designed and assembled in Quebec, the RollerSki has proven its durability year after year in the most extreme Canadian winter conditions.

Using Your RollerSki

• Use on asphalt or concrete roads without holes, speed bumps or frost heaves over 2 cm (3/4").
• When loading or unloading a trailer, keep the height difference between the trailer floor and the ground under 2 cm (3/4") and go as slowly as possible.
• Keep speed below 20 km/h (12 mph) with the wheels engaged.

Maintenance and Replacement Parts

• Lubricate the coil spring at the start and end of each season with a few drops of 5W30 synthetic oil. Do not use WD-40 or a degreaser.
• Check the wheels mid-season and at season end. Replace any wheel with cracks, missing pieces, or less than 1/4" of rubber left, or if the runners touch the ground while the RollerSki is engaged.
• Check that all bolts and nuts are tight at the start, middle and end of each season.
• Replacement wheels: K02-9201 / K02-9203
• Coil spring cage: K02-9005
• Bolts and washers: K02-9003
• Easier engagement with winter boots: RS-SEE

Disclaimer

We recommend that you familiarize yourself with the driving characteristics of your modified vehicle before using it in extreme conditions. Carefully read all instructions before installing this product. If you do not have the necessary tools or technical knowledge to install this product correctly, have it installed by an authorized dealer.